Billericay Plumbers
With emergency local engineers covering all areas, ready 24 hours a day*, A2B Billericay Plumbers can provide help with most expediency. Our Billericay plumbing engineers come with a target response time of less than 2 hours* and we only charge from the time of arrival. No payment is taken until the work is completed and you have signed to say you are satisfied! (deposit may be required for parts purchased).
At A2B Billericay Plumbers we specialise in solving all types of plumbing problems including burst pipes in Billericay, shower/bath leaks, toilet faults and blocked drains. We are registered with many Quality Assurance Firms such as the Gas Safe Register, so that you know you are in safe hands.
Your satisfaction and safety is our top priority as we hope that you will not only re-use our services but also recommend us to your friends and family. Our local plumbing team covering Billericay pride themselves on being fast, efficient and reliable. Whether you have a leaking tap, a boiler breakdown or you have any other plumbing problem, call our free phone line for free quotes and estimates.
Our Local Billericay plumbers are CRB checked
Recommend us to your friends
Boiler Repair
Our local heating engineers covering Billericay are GAS Safe Registered, ensuring a high quality of work and peace of mind.
Burst Pipe Repair
If you discover a burst or leaking pipe, our fully trained plumbers will respond within 30-90 minutes* in Billericay.
Installations
From a simple faucet installation to a full bathroom suite, our experienced plumbers are able to carry out plumbing installations at a time that suits you best.
Professional Services
A2B Billericay Plumbing services include:
- 24 Hour Plumbers*
- Free Written Quotes
- Domestic & Commercial Service
- Insurance Approved
Example Of Our Services
Condensing Boiler
A condensing boiler is a type of boiler that has increased efficiency, with an average efficiency of 82-89% in a real house installation (although laboratory tests claim up to 95-98%), compared with an average efficiency of 50-80% with a non-condensing boiler. This increase in efficiency is possible because the boiler re-uses the heat of the flue gases and vapours to heat up water, thus wasting less energy. The flue gases typically reach temperatures of 180-200°C, and thus a lot of heat (and therefore, energy) is wasted to the atmosphere. For this to work, the gases must be extracted with the use of a fan to a vent, and for the excess water collected (the water that condenses to release the heat) to be drained away using the usual waste water pipes. All new gas boilers installed since April 1st 2005 (and since April 1st 2007 for oil-fired boilers) are required to be condensing boilers, unless exceptional circumstances apply.
